With adequate equipment, also used in topographic studies, you can make the analysis of the vertical angle of structural and monumental elements.
The resistographic test is a survey technique that allow us to investigate the mechanical properties of timber structural elements and the density [..]
The degree of humidity of the structural and decorative wooden elements is closely correlated to the deformation and to the pathologies of degradation [..]
The technology of the Ground Probing Radar (GPR), compared to classical techniques (direct surveys), offers a number of benefits including the [..]
The ultrasonic method is a non-destructive investigation method applicable to concrete structures for determining the speed of propagation of [..]
The measurement of the ultrasonic velocity is used to determine the value of the modulus of elasticity of the timber elements and provides useful [..]
Endoscopy is a non-destructive technique of visual inspection. The test shall include, after the realization of a small hole, the survey of the [..]
Among the services offered by Giancarlo Maselli Srl, there is the collection and cataloging of material samples (concrete, steel, mortar, brick, [..]
The shear test or Shove test, combined with single flat-jack test, is used to determine the shear strength of the masonry, in situ. It can be [..]
The flat jacks test, allow us to evaluate the in situ stress state and to mechanically characterize masonry as required by the Technical Standards for [..]
Knowledge of the value of axial tensile force acting on the metal chains of an historic building is of paramount importance for the evaluation of the [..]
The pacometric test, exploits the magnetic properties of the steel and is widely used for the survey of the reinforcing bars in a completely [..]
The sclerometric test allow us to estimate the compressive strength Rc of the concrete, on-site. The survey consists in projecting, with a determined [..]
The durometer hardness test is a test that provides an index of the quality of the material and some of its fundamental mechanical properties. From [..]
The test is intended to provide information on the resistance that the mortar joint offers to the penetration of a needle of steel by means of blows [..]
Our technician are able to carry out intrados and extrados controlled demolition for the survey of floor packages. Usually, the study is preceded by [..]
The stratigraphic survey consist in the progressive removal of various coating layers of a wall (eg. The first painting, the second painting and [..]
It is a test which consist in the scraping of the plaster at the intersection of load-bearing walls of masonry, to review the status and type of link [..]
Excavations are specifically made for the survey of the depth and geometry of the foundation of various construction types.
Our technicians, properly trained, have many years of experience in visually identifying conditions of degradation of the wooden elements such as: [..]
The sclerometric test on wood is a natural complement to other non-destructive investigation tests of wooden elements, which are part of our [..]
The ultrasonic thickness measurement is a technique intended for the meaurement of the thickness of a piece made of uniform material. This [..]
Our technician carry out dimensional measurements of the characteristics and warping of wooden elements for the exact definition of structural [..]
Our technician carry out the analysis of the degree of moisture (rainwater, condensation, by capillary absorption) in the masonry through [..]
Load tests are designed to identify the correspondence between the theoretical and the real behavior of structures, helping the structural engineer to [..]
The purpose of the survey is to measure the resistance to tearing from the substrate of a portion of plaster, suitably circumscribed, by applying a [..]
The Pull-Out test is an indirect measure of the resistance Rc of the concrete measured by means of the extraction of a dowel Fischer MK 10 introduced [..]
Thermography is a completely non-invasive investigation based on the survey of the radiation that a body, with a temperature above absolute zero [..]
